Dynamic Spine Calculator NEW REVISED 1-8-2011

What's on your mind? Discuss anything 'off topic.' Fishing, Camping, Hobbies, etc.
Post Reply
User avatar
Les
Raghorn Bull
Posts:37
Joined:Wed Aug 05, 2009 6:50 am
Location:Florida n Maine
Dynamic Spine Calculator NEW REVISED 1-8-2011

Post by Les » Sat Jan 08, 2011 10:43 pm

STU worked up a solution to the issue of getting your data easily into the library page.
He added a "header" line to the data library page that is automatically filled out with as much detail as possible of your setup that has been entered in the main calculator page. You can now simply copy and paste that data into any of the archived rows below the header....this info then stays put and becomes your historical data. The added bonus is that I have made it so the AMO deflection and spine as well as the shaft diameter now shows in the header line for any shaft selected. This was a previous request from someone who mentioned that fining this information on all the various shafts is sometimes difficult. Now you can see all the data at will!

Les is testing it out now and if he gives it a thumbs up then it will be released on the website very soon.


The program is tested and WOW!!
The Results is 2011 Dynamic Spine Calculator Rev 12-25-10 v1 (2).xls
I tested the program on Mac excel, and Open Office and Microsoft Excel on Windows 7. It works well in all.

You cannot do a line copy paste the first cell is protected. You may need to play with paste options.

1. Microsoft Excel Users You will need to click on Make Type “shift key” and click on Dynamic Spine Required. This will highlight all the cells in the row. Right click to bring up copy function and copy. Scroll back to the cell under Make Type on the line you want to copy the information to. Use Paste Options and select values.

2. Open Office Users You will need to click on Make Type “shift key” and click on Dynamic Spine Required. This will highlight all the cells in the row. Right click to bring up copy function and copy. Scroll back to the cell under Make Type on the line you want to copy the information to. Use Paste Special and make sure that only text and numbers is checked.

3. MAC Excel Users You will need to click on Make Type “shift key” and click on Dynamic Spine Required. This will highlight all the cells in the row. Right click to bring up copy function and copy. Scroll back to the cell under Make Type on the line you want to copy the information to. Use Paste Options and select values.

You can down load the new revised version at http://www.heilakka.com/stumiller/

User avatar
Night Wing
Royal (6X6) Bull
Posts:728
Joined:Mon Oct 27, 2008 8:06 pm
Location:Texas

Re: Dynamic Spine Calculator NEW REVISED 1-8-2011

Post by Night Wing » Sun Jan 09, 2011 12:54 am

I saw this on the Trad Gang site. Stu's DSC calculator program keeps getting better and better.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. SPD: 185 fps. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. SPD: 174 fps. GPP: 11.37

User avatar
Greywolf
Global Moderator
Posts:2763
Joined:Sat May 02, 2009 7:52 pm
Location:Honolulu,Hawaii
Contact:

Re: Dynamic Spine Calculator NEW REVISED 1-8-2011

Post by Greywolf » Sun Jan 09, 2011 1:35 am

30" 2117
You never get a second chance to make a first good shot Greywolf

Skype name
mark-in-hawaii

Post Reply