Decorations for a possibles bag

For all of you making your own gear! i.e. Possible bags, powder horns and measures, etc.

Decorations for a possibles bag

Postby hawkthrower » Thu Sep 14, 2017 8:05 am

So I thought I'd get a little fancy and add some to the bag I made a while back. -
I wanted to add a beaded edge to the flap..... so I finally had an hour or two to think about it and I put together these for a start....

IMG_0015 (2).JPG



figure I'll need about 50 of them with copper and silver beads strung on top before they are added to the bag's flap......these 4 took a couple hours, just hope I can get a bit faster at making them, it's gonna take a while!
"Never utter these words! 'I do not know this—therefore it is false.'
One must study to know, know to understand, understand to judge."
The apothegm of Narada,
an ancient east Indian philosopher
User avatar
hawkthrower
Royal (6X6) Bull
 
Posts: 526
Joined: Tue Jan 04, 2011 4:20 pm
Location: Central New Mexico

Re: Decorations for a possibles bag

Postby markh » Sat Sep 16, 2017 5:32 pm

They should look great, a lot of work, but will look good. Mark
markh
Spike Bull
 
Posts: 5
Joined: Fri Feb 03, 2017 4:23 pm

Re: Decorations for a possibles bag

Postby WinterHawk » Sun Sep 17, 2017 2:58 pm

Boy, your wife puts up with a lot if you're pulling out her hair to make those! :eek:

Before you get too far into this, you might want to hang some on the bag and use it to see if they tangle up on you; otherwise you may be combing them out every time you go out shooting. It does look like a nice decoration, that's for sure!

~WH~
~WH~
WinterHawk
4X4 Bull
 
Posts: 109
Joined: Thu Feb 02, 2017 9:55 pm

Re: Decorations for a possibles bag

Postby hanshi » Sat Sep 23, 2017 3:50 pm

That will be all kinds of cool! Here's my pathetic attempt at a shooting bag made from canvas and deer hide.http://www.tradrag.com/forum/download/f ... 53473f2dd3

The one on the left is a leather shooting bag I made for squirrel hunting.
Attachments
fb02bf48-86fd-4178-981d-ee01a7575063_zpse3ad6ce8.jpg
Young guys should hang out with old guys; old guys know stuff.
User avatar
hanshi
5X5 Bull
 
Posts: 379
Joined: Thu Apr 16, 2009 10:32 pm
Location: Central Va

Re: Decorations for a possibles bag

Postby Captchee » Sun Sep 24, 2017 9:07 am

nice looking bags folks
horse hair dangles are cool but you may want to make them a little thicker with hair like the 2nd one in the photo .
how are you making them that's taking you so long Hawkthrower. ?

how we used to do silver Jingles and dangles of our dance regalia using silver cones or Copenhagen lids .is real simple and fast .
don't know if it helps but here how .

there were 2 different types . single string and double string .
single string "like you have " I used if we wanted to attach beads to the dangle IE like on a hair roach .

in that case the hair be it horse hair or dyed deer hair laid out .. for a broom effect a point is chosen just a little longer then the cone itself .. your sinew is tied off with a simple over hand Knott . that leaves you with 2 end of sinew . one end is laid along the hair and the other is fed threw the jingle . as the sinew is pulled up into the cone it folds the hair in 1/2 right at the Knot. .
pull the hair up tight in the cone or in your case the shell casing . if the hair wants to pull through the hole then simply grab onto the hair and slide it back out of the cone . add onto the sinew a bead or item that's a little bigger then the hole and feed the cone back on the sinew . Wa la a horse hair or deer hair dangle that you can add beads to .

now for the double thread . the double thread is for when you need to be able to tie off the dangle tight . say like to the bottom of your bag . the only difference in how the dangle is done is that instead of letting one end of your sinew hang down , both ends are fed through the cone . if beads , Teeth or Cora are added to the dangle then they are either threaded on the hair itself or strung up and tied into it .

there you have it . pretty simple . if you want a thicker look . just tie to the hair in the center of your length . for the layered look tie it closer to the end . if you don't want the layered look and folding the hair in half isn't long enough , just tie the hair of no further from the end then the length of your dangle ..
oh one last thing . one of the reasons you see a lot of the dangles done with tapered cones is because as you pull the hare up into the cone it becomes wedged . its a lot harder for the hair to fall out over time .
in your case you might want to add a spot of hot glue on the hair at the Knott as you pull the casing down over the hair .
anyway maybe that will be helpful. your bags going to look pretty cool

the
User avatar
Captchee
Global Moderator
 
Posts: 1792
Joined: Sun Dec 28, 2008 10:46 am
Location: Idaho

Re: Decorations for a possibles bag

Postby hawkthrower » Wed Nov 22, 2017 9:52 am

Captchee, Its not the "making" that's taking the time - I'm drilling out spent 22 shells instead of twisting jangle cones (done a bunch of them in the past too). That isn't the time eater either - It's carding the horse hair and then getting the lengths lined up so I can tie off and pullem into the brass...... carding the hair free of knots and snags is time - lots of time... I'm using mane hair, not tail, its thinner, Bundling and and pulling the hair in, adding beads, and attaching them is a breeze......Trimming the hair "brush style I wouldn't need to be quite as concerned with getting the hair all combed out and lined up (could cut and comb after and it would be quick), but I want to be sure I hit as much hair in the middle of the length as I can so the taper looks "right" and the hair won't pull out as easily. These are single string sinew, the back is line knotted so each string is tied to the two adjacent. Here's the progress so far-

IMG_0208A.jpg
"Never utter these words! 'I do not know this—therefore it is false.'
One must study to know, know to understand, understand to judge."
The apothegm of Narada,
an ancient east Indian philosopher
User avatar
hawkthrower
Royal (6X6) Bull
 
Posts: 526
Joined: Tue Jan 04, 2011 4:20 pm
Location: Central New Mexico

Re: Decorations for a possibles bag

Postby WinterHawk » Wed Nov 22, 2017 7:07 pm

That's lovely! The finished bag is going to be the envy of everyone!
~WH~
WinterHawk
4X4 Bull
 
Posts: 109
Joined: Thu Feb 02, 2017 9:55 pm

Re: Decorations for a possibles bag

Postby hawkthrower » Sun Apr 15, 2018 9:59 am

Slow but continued progress -

IMG_0993.JPG


IMG_0997a.JPG


IMG_0999a.JPG
"Never utter these words! 'I do not know this—therefore it is false.'
One must study to know, know to understand, understand to judge."
The apothegm of Narada,
an ancient east Indian philosopher
User avatar
hawkthrower
Royal (6X6) Bull
 
Posts: 526
Joined: Tue Jan 04, 2011 4:20 pm
Location: Central New Mexico

Re: Decorations for a possibles bag

Postby markh » Tue Apr 17, 2018 4:08 pm

looks good. Mark
markh
Spike Bull
 
Posts: 5
Joined: Fri Feb 03, 2017 4:23 pm


Return to Do It Yourself Traditional Gear

Who is online

Users browsing this forum: No registered users and 2 guests

















cron