shelf radius

Dedicated to the Bowyer and his craft. A place to talk building techninques, design, and build-alongs.

shelf radius

Postby Peanut39350 » Wed Oct 15, 2014 9:15 pm

what do you guys use to put the radius on the shelf when bow building, is there an easy way I always have trouble getting a good radius on my shelf
Peanut39350
Spike Bull
 
Posts: 12
Joined: Mon Jan 06, 2014 3:40 pm

Re: shelf radius

Postby Greywolf » Sun Oct 19, 2014 5:38 pm

I just free hand mine, all depends on how I feel too sometimes I'll put the high point further back of center and put more of a "slope" on the shelf.

I use a #49 Nicholson rasp to get my shape so I don't take off to much at one time.

I leave the straight shelf on till I shape the handle and grip, then just radius from there and how it looks. If you like close to "shooting off the knuckle" make it lower.
I like to leave at least 1/4 inch minimum at the highest point. If they say they might go with a elevated rest I'll move the high point 2/3rds back. so they have room.

Rule is there is no rule, just how ever you like it. some like the top of the shelf 1 1/4 inch up from center but I do 1 1/2" to 1 3/4" up from center. then again that....
is all subject to change.
You never get a second chance to make a first good shot Greywolf

Skype name
mark-in-hawaii
User avatar
Greywolf
Global Moderator
 
Posts: 2759
Joined: Sat May 02, 2009 7:52 pm
Location: Honolulu,Hawaii


Return to The Bowyers Workbench

Who is online

Users browsing this forum: No registered users and 5 guests

















cron